Manufacturers of a Comprehensive Family of
Refuse and Recycling Vehicles to serve your need

Micro XHD

Micro XHD

Overview

Coming from the Farid Satellite vehicle, Mini Compactor range of equipment, the Micro XHD LoadMax delivers high performance collection of recycling materials, especially food waste and other high liquid contaminated waste streams

The Micro XHD LoadMax, a semi-compaction body, is available in 7m³ capacity for the UK market. It has a fully sealed; one piece construction body with a compaction ratio of 3.5:1. The body, which is suitable for mounting to a chassis GVW of 11t - 12t, is a fully sealed one piece construction body with guaranteed no leakages - making it ideal for food waste collection and other recycling tasks. It provides an ideal solution where restricted access is a problem and excellent manoeuvrability is required.

The Micro XHD LoadMax also comes with an integral Farid comb bin lift capable of handling all types of bins from 120 litres to 1100 litres capacity and food waste caddies or ‘slave type’ bins. Alternatively, hand loading is achieved by using optional side access doors which can be opened manually at a moments notice.

The 3.5:1 compaction ratio is achieved by a well proven, heavy duty hydraulic sweep plate and transitional carriage plate compaction system. Forward load and weight distribution is achieved throughout the loading cycle, ensuring optimum axle loading and excellent payloads are achieved.

Waste Unloading

Unloading of waste is achieved by tipping of the Micro XHD LoadMax body ensuring complete clean discharge of all waste materials and residual liquids collected. This tipping discharge operation can be done into any receptacles such as Skips, ISO Containers, AD Plants or Waste Transfer Stations.

Satellite Operation

The Micro XHD LoadMax is an ideal RCV for satellite operation. Ultimate satellite discharge is performed when using the Farid T1 refuse collection vehicle offering a vehicle to vehicle ‘mothership’ - transfer of waste solution.

Key Benefits

  • Fully sealed one piece high tensile steel body construction for high strength with guaranteed no leakages
  • Small, compact and very manoeuvrable, an ideal solution where restricted access is a problem and excellent manoeuvrability is required
  • Farid comb bin lift fitted as standard - Capable of handling all EN standard bins from 120 litres to 1100 litres capacity and food waste caddies or ‘slave type’ bins  Hand loading can be achieved by using optional side access doors
  • Enclosed body roof for waste containment and better packing strength distribution with reduced stress points
  • Top mounted, fully enclosed compaction blade with 3.5:1 compaction.
  • Compaction blade cylinders mounted outside the hopper area, keeping them clear of the refuse loading area
  • Unloading of waste by tipping, ensuring complete discharge of waste materials and residual liquids collected. Suitable for tipping into skips, rolonof containers and satellite discharge operation

Technical Specification

MAIN FEATURES
  • Shorter overall vehicle length as bin lift stows underneath rave and within body length - Ideal for restricted access, rural & inner city collections.
  • Large hopper for 1100 / 1280 litre bins - Can be tipped without spillage in one cycle. Faster loading without ‘choking of the hopper’ due to one piece body design with no separate hopper. No waiting for hopper clearance cycles at multiple bin collection sites.
  • One piece body retains liquid up to 1000mm deep / 3650 litres with front body drain as standard - Ideal for food waste and materials with a high liquid content.
  • Alternate compacting cycle
  • Hydraulic compacting blade
  • Compaction cycles: - single synchronized with container lifting device - manual
  • Unloading by body tipping with double effect cylinder at the first stage
  • Stabilizers for unloading operations
  • Drainage gate
BODY CONSTRUCTION
  • Curved shaped one piece construction, rolled high tensile steel body for high strength and good aesthetic appearance
  • Concave shaped body floor to facilitate easy leachate collection and drainage
  • Body roof for waste containment and better packing strength distribution with reduced stress points
  • Body drainage gate with screw tap
TAILGATE CONSTRUCTION
  • One piece construction body with no separate tailgate / hopper ensures no leakages
  • Top mounted, fully enclosed compaction blade with 3:1 compaction
  • Compaction blade cylinders mounted outside the hopper area, keeping them clear of the refuse loading area
HYDRAULIC SYSTEM
  • Low engine revs (speed up controlled by hydraulic services)
  • PTO mounted on the gearbox – 1 x gear pumps
  • Oil tank with filter, cartridge 60 micron, in compliance with UNI EN 1501-1
  • Max. pressure valves on hydraulic system
  • Block pilot valves on lifting device cylinders
  • Mineral hydraulic oil ISO VG46
ELECTRICAL SYSTEM
  • In compliance with UNI EN 1501-1 regulations
  • Electrical system with PLC
  • Body unloading electric controls with rear mounted wander lead
  • 1 x white light for night operation
  • 1 x amber rotating beacon
  • Engaged reverse speed alarm
  • 3 x emergency buttons (2 on body sides + 1 on rear mounted wander lead control)
  • Rescue button
  • PTO connection safety controls
  • PTO engagement/disengagement electrical control • In cab control box: PTO connection - main switch - light alarms and other control buttons on demand
  • 1 x operators-driver buzzer, on side of the body
  • Rear view camera
FINISHING
  • Fully degreased & primed body finished in two pack water based paint
  • Oil reservoir, cylinders, container lift and lid opener finished in Farid light blue
  • Lighting in compliance with Construction & Use regulations
BIN LIFTER
  • 120-1100 lt “Comb” Bin Lifter
  • Selectable pneumatic control
  • Operator shear protection
  • Grease points to all moving parts
WASTE UNLOADING
Unloading of waste is achieved by tipping of the Micro XHD LoadMax body ensuring complete clean discharge of all waste materials and residual liquids collected. This tipping discharge operation can be done into any receptacles such as Skips, ISO Containers, AD Plants or Waste Transfer Stations.

SATELLITE OPERATION

Ultimate satellite discharge operation is performed when using a Farid T1 Series rcv offering a vehicle to vehicle ‘mothership’ transfer of waste solution.

FHE Cat 3 ABP Compliant Equipments:
  1. Micro S (4m³ capacity), one-piece construction, (liquidity retention of 2950 litres capacity), is a 100% fully sealed and leak proof tipping body variant.
  2. Micro L (5m3 capacity), one-piece construction, (liquidity retention of 3650 litres capacity), is a 100% fully sealed and leak proof tipping body variant.
  3. Micro XHD LoadMax (7m³ capacity), one-piece construction, (liquidity retention of 5500 litres capacity), is a 100% fully sealed and leak proof tipping body variant.

Brochure Download

Visit Review Site Coral www from this link.

Contact Us

Farid Hillend Engineering Limited
Taxi Way
Hillend Industrial Estate
Dunfermline, Fife
KY11 9ES
United Kingdom

Tel: +44 (0)1383 823625
Fax: +44 (0)1383 824062

Enquiries

Sales Enquiries
This email address is being protected from spambots. You need JavaScript enabled to view it.

After Sales Enquiries
This email address is being protected from spambots. You need JavaScript enabled to view it.

Parts Enquiries
This email address is being protected from spambots. You need JavaScript enabled to view it.

Accounts Enquiries
This email address is being protected from spambots. You need JavaScript enabled to view it.

Accreditations

We have achieved the following accreditations:
 

CHEM vbra CIWM

CIWN AffiiatedCARE




کانال تلگرام ماهواره جیبی اندروید گروه تلگرام چت روم فال حافظ