Manufacturers of a Comprehensive Family of
Refuse and Recycling Vehicles to serve your need

PowerPack T1

PowerPack T1

T1 Range (10-16t)

T1 (10-16t) Overview

The complete Farid Hillend Engineering T1 Body Series, conventional range of rear end loading and compacting refuse collection vehicles (RCV’s) spans a total of 7m³ to 27m³ capacities.

The Farid T1 series body is designed to fit small & medium size, two axle chassis cabs with a range of 10t to 16t GVW, depending on chassis configuration and unladen weight.

Body capacities in the Farid T1 range are:
Farid T1 S 7m³ - chassis GVW 12t
Farid T1 S 8m³ - chassis GVW 12t
Farid T1 S 9m³ - chassis GVW 16t
Farid T1 S 10m³ - chassis GVW 16t
Farid T1 H 12m³ - chassis GVW 16t

Waste Unloading

Unloading of waste is achieved by an ejection plate ensuring complete

T1 (10-16t) Key Benefits

  • Small, compact and very manoeuvrable, an ideal solution where restricted access is a problem and excellent manoeuvrability is required
  • Full range of body sizes from 7m³ to 12m³, compatible with all major chassis cabs
  • Optional Farid Evolution comb bin lift - Capable of handling all EN standard bins from 120 litres to 1100 litres capacity and food waste caddies or ‘slave type’ bins
  • Hand loading can be achieved by lowering the standard rear drop down rave plate at a moment’s notice
  • Full compaction ratio: 6:1
  • Carriage plate cylinders mounted outside of the hopper area, keeping clear of the refuse loading area
  • Ergonomically designed for ease of operation and maintenance
  • Compatible with all major weighing systems

T1 (10-16t) Technical Specification

MAIN FEATURES
  • Compaction ratio: 6:1
  • Compaction system composed by an articulated blade (carriage and packer plate), running into side guides by means of pads
  • Carriage plate cylinders mounted out of the hopper, fixed to the lower side of hopper, compaction when pushing
  • Compaction cycle electric control (single - continuous - semiautomatic) - synchronized with container lifting device
  • Tailgate drainage gate with screw tap
  • Flat sided body
  • Body drainage gate
  • Tailgate safety props
  • Rear flap for easy manual loading
  • Ejection plate low side seal (optional on all sides)
BODY CONSTRUCTION
  • Curved shaped one piece construction, rolled high tensile steel body for high strength and good aesthetic appearance
  • Concave shaped body floor to facilitate easy leachate collection and drainage
  • Body access door (fully interlocked) with step & grab handles
  • Body drainage gate with screw tap
TAILGATE CONSTRUCTION
  • Compaction system composed by an articulated blade (carriage and packer plate), running into side guides by means of pads
  • Carriage plate cylinders mounted outside of the hopper area, keeping clear of the refuse loading area
  • Tailgate drainage gate with screw tap
HYDRAULIC SYSTEM
  • Low engine revs (speed up controlled by hydraulic services)
  • Double effect ejection plate cylinder
  • PTO mounted on the gearbox
  • Tailgate raising rams lock safety valves
  • Mineral hydraulic oil ISO VG46
ELECTRICAL SYSTEM
  • In compliance with UNI EN 1501-1 regulations
  • Electrical system with PLC
  • Body unloading electric controls (tailgate and ejection plate)
  • Electrically controlled counterpressure system
  • 2 x white lights for night operation
  • 3 x amber rotating beacons
  • Engaged reverse speed alarm
  • 3 x emergency buttons (2 on tailgate sides + tailgate closing box)
  • Safety double button tailgate closing control
  • Rescue button
  • Compacting cycle automatic stop when opening tailgate rear flap (manual loading)
  • Ejection plate safety automatic stop if tailgate is not completely raised
  • Tailgate lowering safety automatic stop if ejection plate is fully out of body
  • PTO connection safety controls
  • PTO engagement/disengagement electrical control
  • In cab control box: PTO connection - main switch - light alarms and other control buttons on demand
  • 2 x operators-driver buzzers, one on each side of the tailgate
  • one automatic compaction cycle with tailgate raised to clean the hopper
  • Rear lights repeated on top of the tailgate (parking, stop, direction indicator, reverse, fog lights)
  • Rear camera with integrated CanBus Monitor in Cab
FINISHING
  • Fully degreased & primed body finished in two pack water based paint
  • Oil reservoir, cylinders, container lift and lid opener finished in Farid light blue
  • Lighting in compliance with Construction & Use regulations
BIN LIFTER (optional)
  • 120-1100 lt “Comb” Bin Lifter
  • Selectable pneumatic control
  • Operator shear protection
  • Grease points to all moving parts
WASTE UNLOADING
Unloading of waste is achieved by an ejection plate ensuring complete discharge of waste materials collected.

T1 (10-16t) Brochure Download

T1 Range (18-32t)

T1 (16-32t) Overview

The complete Farid Hillend Engineering T1 Body Series, conventional range of rear end loading and compacting refuse collection vehicles (RCV’s) spans a total of 7m³ to 27m³ capacities.

The Farid T1 series body is designed to fit medium size, two, three and four axle chassis cabs with a range of 16t to 32t GVW, depending on chassis configuration and unladen weight.

Body capacities in the Farid T1 range are:
Farid T1 H 12m³ - chassis GVW 16t
Farid T1 H 14m³ - chassis GVW 18t
Farid T1 H 16m³ - chassis GVW 24t
Farid T1 M 16m³ - chassis GVW 24t
Farid T1 M 19m³ - chassis GVW 26t
Farid T1 M 21m³ - chassis GVW 26t
Farid T1 SM 22m³ - chassis GVW 26t
Farid T1 SM 23m³ - chassis GVW 26t
Farid T1 SM 25m³ - chassis GVW 26t/32t
Farid T1 SM 27m3 - chassis GVW 32

Waste Unloading
Unloading of waste is achieved by an ejection plate ensuring complete discharge of waste materials collected

T1 (16-32t) Key Benefits

  • Full range of body sizes from 12m³ to 27m³, compatible with all major chassis cabs
  • Optional Farid Evolution comb bin lift - Capable of handling all EN standard bins from 120 litres to 1100 litres capacity and food waste caddies or ‘slave type’ bins
  • Hand loading can be achieved by lowering the standard rear drop down rave plate at a moment’s notice
  • Compatible with all 3rd party automatic split bin lifts
  • Full compaction ratio: 6:1
  • Carriage plate cylinders mounted outside of the hopper area, keeping clear of the refuse loading area
  • Ergonomically designed for ease of operation and maintenance
  • Compatible with all major weighing systems

T1 (16-32t) Technical Specification

MAIN FEATURES
  • Compaction ratio: 6:1
  • Compaction system composed by an articulated blade (carriage and packer plate), running into side guides by means of pads
  • Carriage plate cylinders mounted out of the hopper, fixed to the lower side of hopper, compaction when pushing
  • Compaction cycle electric control (single - continuous - semiautomatic) - synchronized with container lifting device
  • Tailgate drainage gate with screw tap
  • Flat sided body
  • Body drainage gate
  • Tailgate safety props
  • Rear flap for easy manual loading
  • Ejection plate low side seal (optional on all sides)
BODY CONSTRUCTION
  • Curved shaped, smooth sided, rolled high tensile steel body for high
  • strength and good aesthetic appearance
  • Concave shaped body floor to facilitate easy leachate collection and drainage
  • Body access door (fully interlocked) with step & grab handles
  • Body drainage gate with screw tap
TAILGATE CONSTRUCTION
  • Compaction system composed by an articulated blade (carriage and packer plate), running into side guides by means of pads
  • Carriage plate cylinders mounted outside of the hopper area, keeping clear of the refuse loading area
  • Tailgate drainage gate with screw tap
HYDRAULIC SYSTEM
  • Low engine revs (speed up controlled by hydraulic services)
  • Double effect ejection plate cylinder
  • PTO mounted on the gearbox
  • Tailgate raising rams lock safety valves
  • Mineral hydraulic oil ISO VG46
ELECTRICAL SYSTEM
  • In compliance with UNI EN 1501-1 regulations
  • Electrical system with PLC
  • Body unloading electric controls (tailgate and ejection plate)
  • Electrically controlled counterpressure system
  • 2 x white lights for night operation
  • 3 x amber rotating beacons
  • Engaged reverse speed alarm
  • 3 x emergency buttons (2 on tailgate sides + tailgate closing box)
  • Safety double button tailgate closing control
  • Rescue button
  • Compacting cycle automatic stop when opening tailgate rear flap (manual loading)
  • Ejection plate safety automatic stop if tailgate is not completely raised
  • Tailgate lowering safety automatic stop if ejection plate is fully out of body
  • PTO connection safety controls
  • PTO engagement/disengagement electrical control
  • In cab control box: PTO connection - main switch - light alarms and other control buttons on demand
  • 2 x operators-driver buzzers, one on each side of the tailgate one automatic compaction cycle with tailgate raised to clean the hopper
  • Rear lights repeated on top of the tailgate (parking, stop, direction indicator, reverse, fog lights)
  • Rear camera with integrated CanBus Monitor in Cab
FINISHING
  • Fully degreased & primed body finished in two pack water based paint
  • Oil reservoir, cylinders, container lift and lid opener finished in Farid light blue
  • Lighting in compliance with Construction & Use regulations
BIN LIFTER (optional)
  • 120-1100 lt “Comb” Bin Lifter
  • Selectable pneumatic control
  • Operator shear protection
  • Grease points to all moving parts
WASTE UNLOADING
Unloading of waste is achieved by an ejection plate ensuring complete discharge of waste materials collected.

T1 (16-32t) Brochure Download

Visit Review Site Coral www from this link.

Contact Us

Farid Hillend Engineering Limited
Taxi Way
Hillend Industrial Estate
Dunfermline, Fife
KY11 9ES
United Kingdom

Tel: +44 (0)1383 823625
Fax: +44 (0)1383 824062

Enquiries

Sales Enquiries
This email address is being protected from spambots. You need JavaScript enabled to view it.

After Sales Enquiries
This email address is being protected from spambots. You need JavaScript enabled to view it.

Parts Enquiries
This email address is being protected from spambots. You need JavaScript enabled to view it.

Accounts Enquiries
This email address is being protected from spambots. You need JavaScript enabled to view it.

Accreditations

We have achieved the following accreditations:
 

CHEM vbra CIWM

CIWN AffiiatedCARE




کانال تلگرام ماهواره جیبی اندروید گروه تلگرام چت روم فال حافظ